RED DSMC V5.2 Especificaciones Pagina 194

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 240
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 193
955-0002_v3.2, Rev-A1 COPYRIGHT © 2012 RED Digital Cinema
193
UPGRADING REDMOTE FIRMWARE
The REDMOTE update utility allows you to upgrade the firmware on your REDMOTE.
NOTE: After firmware has been upgraded, the REDMOTE must be paired to the camera again.
SETUP
CONFIGURING REDMOTE CONNECTION WITH COMPUTER (MAC)
The first step in upgrading REDMOTE firmware is to establish communication between the MAC and the
REDMOTE.
1. Connect a USB to mini-USB cable between the computer and the USB connector on the
REDMOTE.
2. Go to System Preferences and choose Network. This may open automatically when the REDMOTE
is connected.
3. Look for a device called RNDIS/ ...Gadget.
4. Change Configure IPv4 setting to “Manually” (as shown).
5. In the IP Address field, enter 192.168.0.1 (as shown).
6. In the Subnet Mask field, enter 255.255.255.0 (as shown).
7. The Status should change to “Connected” after changes.
Vista de pagina 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 239 240

Comentarios a estos manuales

Sin comentarios