Red DSMC FAN 2.0 UPGRADE Manual de usuario descargar pdf (Pagina 20)

DSMC FAN 2.0 UPGRADE INSTRUCTIONS

955-0012, REV-D | 20

INSTALL TOP FAN WITH DSMC TACTICAL TOP PLATE

REQUIRED TOOLS

 T6 Torx driver (included)

 3/16 inch Allen wrench

 3mm Allen wrench

REMOVE DSMC TACTICAL TOP PLATE

1. Turn off the DSMC and remove all power supplies, DSMC accessories, and the lens.

2. Place the DSMC BRAIN on a suitable flat work surface with the top of the DSMC facing upward.

3. Use a 3mm Allen wrench to loosen the four (4) M4 captive screws by at least two (2) full turns.

4. Use a 3/16 Allen wrench to loosen the two (2) 1/4-20 screws.

5. Continue to loosen all screws until the plate can be removed.

Loosen M4 Screws

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Red DSMC FAN 2.0 UPGRADE Manual de usuario Pagina 20