Red DSMC FAN 2.0 UPGRADE Manual de usuario descargar pdf (Pagina 15)

DSMC FAN 2.0 UPGRADE INSTRUCTIONS

955-0012, REV-D | 15

INSTALL TOP FAN WITH TOP VENT SCOOP

REQUIRED TOOLS

 T8 Torx driver

 T6 Torx driver (included)

REMOVE TOP VENT SCOOP

1. Turn off the DSMC and remove all power supplies, DSMC accessories, and the lens.

2. Place the DSMC BRAIN on a suitable flat work surface with the top of the DSMC facing upward.

3. Use a T8 Torx driver to remove the four (4) M2.5x0.45 x 6 mm cap screws that attach the top vent scoop

to the DSMC BRAIN.

Remove Cap Screws

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Red DSMC FAN 2.0 UPGRADE Manual de usuario Pagina 15